Saving Time, Backs and Money!

Auto Drive Horizon 350 / 770

Manual Drive Horizon 350 / 770

The Horizon is a glass lifter designed for in shop use to assist glass workers to unload, rotate, transport and lay large plates of glass flat onto a cutting table or tempering line. It has a lifting capacity of 300 Kg's (660 Lbs). It can rotate glass measuring upto 4400 mm (180"). The Horizon has a 12 volt battery poweredvacuum pump and 2 hydraulic rams. Quattrolifts   have   released   a   new   glass   lifting   machine   called the   Horizon   that   will   lift   and   tilt   glass   to   the   horizontal.   The Horizon   will   allow   one   operator   to   lift   glass   or   an   IGU   from   a rack   or   truck   and   then   index   the   glass   to   the   horizontal   and then slowly and precisely lower it onto a table or into a frame. The   Horizon   will   allow   one   or   two   people   to   do   what   use   to require   four   to   six   people   in   the   past   with   greater   safety.   This is   perfect   for   setting   DGU’s   into   a   window   frame   to   create   a perfect seal. The Horizon can lift 3660 x 2440mm   stock sheets of glass and transport them around your factory with ease. The Horizon also allows the operator to rotate the glass 90 degrees which is ideal for edgework machines.

Self-propelled   electric   drive   wheel      -      Side   shift   function   for precision      -   Can   be   used   for   on-site   glazing      -      Lifting   capacity up   to   300kg   (660lbs)      -      One   man   operation      -      Lifts   from horizontal   to   vertical      -      12V   vacuum   system      -      Loads   trucks, edgework machines & furnaces

The   Nomad   is   designed   to   assist   glaziers   to   unload,   transport and   install   glass   safely.   It   has   a   lifting   capacity   of   400   Kg's (880   Lbs).   It   can   rotate   glass   measuring   upto   4400   mm (180").   It   has   adjustments   to   allow   for   side   and   top   pocket glazing. The   Nomad   is   the   world's   first   patented   labour   saving,   cost effective   device   which   offers   a   safer   option   to   the   manual handling of glass, slate and board on site. The   Nomad   was   designed   and   developed   by   a   Chiropractor and   Occupational   Health   and   Safety   Consultant,   that   assists glaziers   with   the   installation,   transportation   and   rotation   of glass weighing up to 400 kg (880 lb). The   Nomad   has   received   the   following   awards:   2005   2nd Place   -   Best   Solution   For   Sprain   and   Strain   Injuries,   WorkSafe Vic   Australia   Award;   2005   Finalist   Engineers   Australia   Award; 2004   Invention   Of   The   Year   Award.      The   Nomad   complies with all relevant European directives. • Eliminates    OHS    issues    such    as    strains    and    sprains resulting from manual handling of glass. • Reduces   man   power   required   for   transportation   and installation of heavy glass by up to 50 percent. • Prevents   breakages   and   damage   to   glass   in   transport and installation. • Protects the workers whilst carrying glass. • Rotate long plates of glass.

Nomad 400 / 880

The   Mule   is   designed   to   assist   glass   workers   to   unload, rotate   and   transport   large   plates   of   glass   in   shop.   It   has   a lifting   capacity   of   300   Kg's   (660   Lbs).   It   can   rotate   glass measuring   upto   4400   mm   (180").   The   Mule   has   a   12   volt battery powered vacuum pump. The Mule is Quattrolifts exciting new machine to allow glazing shops handle heavy glass on and off edgework machines, glass dollies and trucks with greater safety and ease. The Mule has a lifting capacity of 660 pounds (300 Kg) and can be operated by one person.   The Mule can rotate glass 360 degrees allowing long and heavy sheets of glass to be loaded onto an edgework machine.   The Mule is operated by a portable DC vacuum pump applying vacuum to four 11 inch Woods cups. The vacuum pump arms can be swivelled allowing for long narrow plates to be handled safely.   The Mule complies with all relevant European Directives. Benefits of using The Mule • Used as an alternative to an overhead crane to handle heavy sheets of glass • Save money as the Mule is about one quarter the cost of a basic overhead crane • Reduce manpower when rotating plates of glass needed for edgework machines • Reduced OSHA risks due to reduced hazardous manual handling of glass • Improved productivity as less people are required to do the same work • Use areas of the glazing shop not serviced by an overhead crane • Safely load trucks outside the glazing shop

Mule 300 / 660

Saving Time, Backs and Money!

Saving Time, Backs and Money!

Saving Time, Backs and Money!

Saving Time, Backs and Money!

Vector 400 / 880

The Vector is designed to allow a glaziers to unload, transport and install large plates of glass with extreme precision. It has a lifting capacity of 350kg's (770lbs) with a dual vacuum system designed for performance.  Handling glass plates and windows can be back breaker due to the weight and dimension of the plates, well not any more. With the Vectors self propelled mechanism, moving and rotating heavy loads is now extremely easy. The vector can move large panels of glass on a variety of angles, and will ensure the safety of your team in shop and on site. A few great features of the Vector: • Lifting capacity up to 350kg (770lbs) • Dual vacuum systems • Self-propelled • Precision adjustment for glazing • Glazes overhead • Rotates and indexes IGU’s • 24V electrical system • Adjustable vacuum cups

Saving Time, Backs and Money!

The Express 150 is designed to allow a glaziers to unload, transport and install large plates of glass. It has a lifting capacity of 150 Kg's (330 Lbs). It can rotate glass measuring upto 3000 mm (120"). It has adjustments to allow for side and top pocket glazing. Handling glass plates and windows can be a back breaker due to the weight and dimension of the plates and the uneven grounds of construction sites. The methods to deliver plates haven’t changed in decades even with windows now getting heavier and larger. Quattrolifts has released the Express, an innovative small portable lifter that allows one man to move plates weighing up 80kg or two men up to 150kg. The Express is loaded onto a truck in two 15kg parts and easily assembled in under a minute. Once assembled the Express can unload plates off the truck and then transport the plates and windows on site. The large 330mm pneumatic wheels allow for travelling over rough grounds on construction sites. The wheelbase can be adjusted from 54 cm to 80cm allowing for narrow walkways on-site. Two terrific features of the Express allow the lite or window to be rotated 360 degrees and secondly the operator can also index the lite allowing him to move through standard 90cm wide doorways. Harry Richardson from Ultimate Glass was impressed when using the Express to transport a 100kg IGU on his own: “In these tough times, the Express allows me to do more work with less people and with greater safety. I’m going to use the Express to install balustrading with just two operators. Each plate weighs about 80 to 100kg.”

Express 150 / 330

Saving Time, Backs and Money!

The Express 200 is designed to allow a glaziers to unload, transport and install large plates of glass. It has a lifting capacity of 200 Kg's (440 Lbs). It can rotate glass measuring up to 3660 mm (144"). It has adjustments to allow for side and top pocket glazing.  Handling glass plates and windows can be a back breaker due to the weight and dimension of the plates and the uneven grounds of construction sites. The methods to deliver plates haven’t changed in decades even with windows now getting heavier and larger.  Quattrolifts has released the Express, an innovative small portable lifter that allows one man to move plates weighing up 80kg or two to three men up to 200kg. The Express is loaded easily onto a truck and quickly assembled in under a minute.  Once assembled the Express can unload plates off the truck and then transport the plates and windows on site. The large 330mm solid wheels allow for travelling over rough grounds on construction sites. The wheelbase can be adjusted from 54 cm to 80cm allowing for narrow walkways on-site.  Two terrific features of the Express allow the lite or window to be rotated 360 degrees and secondly the operator can also index the lite allowing him to move through standard 90cm wide doorways.  Harry Richardson from Ultimate Glass was impressed when using the Express to transport a 100kg IGU on his own: “In these tough times, the Express allows me to do more work with less people and with greater safety. I’m going to use the Express to install balustrading with just two operators. Each plate weighs about 80 to 100kg.”

Express 200 / 440 With Side Shift Included

Your Mobile Glass Handling Solutions!

Auto Drive Horizon

Manual Drive Horizon

Nomad Operator Manual

Mule Operator Manual

Horizon Operator Manual

Express Operator Manual

Express Operator Manual

Horizon Operator Manual

Nomad Spec Sheet

Auto Horizon Spec Sheet

Vector Spec Sheet

Express 150/330 Spec Sheet

Express 200/440 Spec Sheet